Required Action After Replacing Parts
After replacing parts, please execute the related items shown in the table below.
Action after
repair
Changed parts Software
Description page
Main board
(Optical
engine / Main
board
assembly)
Lamp
module
Blower
fan
Color
wheel
After
firmware
update
Firmware
update
v v
Chapter 6.
(page 67
"Firmware
Update")
ADC calibration v v
Chapter 5.
(page 60 "ADC
Calibration")
Color wheel
index
v v
Chapter 5.
(page 65 "Color
Wheel Index")
OSD reset v v v
Chapter 5.
(page 66 "OSD
Reset")
Re-write lamp
usage hours
v
Chapter 5.
(page 62 "Re-
write Lamp Hours")
Fan calibration v v v
Chapter 5.
(page 59 "Fan
Calibration")
• After parts replacement or repair, check that the projector works properly.
• Project images on the screen and check that they are not faulty.
Required Action After Replacing Parts
45
To Next Page
Loading...
Need help?
General
