Service Menu
Setting Item Description
Model Name
Read only
Shows the name of the projector.
DDP ver.
Read only
Shows the present DDP version of the projector.
MCU ver.
Read only
Shows the present MCU firmware version of the projector.
Waveform ID Read only
System Hours (total) Read only
Lamp Hours (DD+ED) Read only
Lamp Hours (full) Read only
Lamp Hours (eco) Read only
Factory Reset DFU
Burn In Test DFU
Failure Log
Records the times of the failure of power on of the projector such
as excessive temperature, lamp failure or fan lock.
Analog Settings See the below table.
Optical Settings See the below table.
Other Settings See the below table.
Read SNID DFU
Color Wheel Index
Use this to adjust the R/G/B value to improve the image when
the color reproduction is not correct. (page 65 "Color Wheel
Index")
Factory Blower RPM
Read only
Shows the factory blower RPM values of the projector.
Extreme Dimming Mode DFU
5. Test & Inspection
54
To Next Page
Loading...
Need help?
General
