*2
When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. See p.61
"Loading Paper".
*3
Actual paper capacity might be lower than indicated here, depending on the paper type.
*4
The paper tray fence is fixed. If you wish to change the size of paper placed in this tray, contact your service
representative.
*5
The paper size is detected automatically.
*6
Select the paper size using the Tray Paper Settings function. For details, see “Changing Tray Paper Settings”,
Paper Settings Reference .
*7
If you want to copy onto custom size paper, enter the size using the Tray Paper Settings function. See
“Changing Tray Paper Settings”, Paper Settings Reference .
*8
The optional tab sheet holder is required.
*9
For details on how to use paper that has a horizontal length of between 487.8 and 630.0 mm (19.20 and
24.80 inches), contact your service representative.
*10
It is recommended to place one sheet at a time.
*11
The maximum number of sheets you can set at once depends on the paper's thickness and condition.
*12
If you wish to copy onto OHP transparencies, select [OHP (Transparency)].
*13
The tab fence is required.
*14
The paper width of between 100.0 and 139.2 mm (3.94 and 5.48 inches) are available only when the
special side fence is utilized.
Paper Thickness
*1
Paper Thickness
Metric Bond paper Cover paper Index paper
Paper Weight 1
52.3 63.0 g/
m
2
14.0 16.9 lb.
Bond
19.0 23.0 lb.
Cover
29.0 34.9 lb.
Index
Paper Weight 2
63.1 80.0 g/
m
2
17.0 21.0 lb.
Bond
23.1 29.9 lb.
Cover
35.0 44.0 lb.
Index
Paper Weight 3
80.1 105.0 g/
m
2
21.1 28.0 lb.
Bond
30.0 38.9 lb.
Cover
44.1 58.0 lb.
Index
Paper Weight 4
105.1 163.0
g/m
2
28.1 43.0 lb.
Bond
39.0 60.0 lb.
Cover
58.1 90.0 lb.
Index
Paper Weight 5
163.1 220.0
g/m
2
43.1 58.9 lb.
Bond
60.1 80.9 lb.
Cover
90.1 121.0 lb.
Index
Paper Weight 6
220.1 256.0
g/m
2
59.0 68.0 lb.
Bond
81.0 94.0 lb.
Cover
121.1 141.0
lb. Index
Paper Weight 7
256.1 300.0
g/m
2
68.1 80.0 lb.
Bond
94.1 110.0 lb.
Cover
141.1 165.0
lb. Index
2. Adding Paper
90