*1
Print quality will decrease if the paper you are using is close to the minimum or maximum weight.
Change the paper weight setting to thinner or thicker.
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (OHP transparencies can produce noise when delivered.)
• When loading paper in the paper trays 1 2, place the print side face down.
• When using the duplex function with tray 1 or tray 2, load the paper so that the odd pages of the
printout are face down.
• When loading paper in the multi bypass tray or the Wide LCT, place the print side face up.
• When using the duplex function with the multi bypass tray or the Wide LCT, load the paper so that
the odd pages of the printout are face up.
• When using tab stock or label paper, make sure to select the appropriate paper type under [Tray
Paper Settings]. See “Changing Tray Paper Settings”, Paper Settings Reference .
• We recommend you load sheets of label paper one by one. This prevents them becoming jammed
inside the machine.
• You can specify whether or not the machine auto detects multi-sheet feeds in paper from every tray.
The default setting is [On]. In the [Adjustment Settings for Operators] menu, you can also specify
whether current jobs are suspended or continued when a multi-sheet feed is detected. For details
about Adjustment Settings for Operators, see “Adjustment Settings for Operators”, Network and
System Settings Reference .
• If multiple sheet feeding occurs, load sheets one by one.
• When loading 52.3 g/m
2
(14.0 lb. Bond) paper into paper trays or loading translucent paper into
the Wide LCT or the multi bypass tray, always use long grain paper.
• If you load paper of the same size and same type in two or more trays, except for the bypass tray,
the machine automatically shifts to the other tray when the tray being used runs out of paper. This
function is called Auto Tray Switching. This allows a large number of copies to be made without
having to interrupt the copy run to replenish paper. To use this function with Auto Paper Select, set
Paper Type to [Plain Paper] or [Recycled Paper] and Paper Thickness to [Paper Weight 2] or
[Paper Weight 3]. For details about Paper Type and Paper Thickness, see “Tray Paper Settings”,
Recommended Paper Sizes and Types
91
To Next Page
Loading...
