Ricoh Ri 3000 - Safety Precautions to be Followed; Environments Where the Machine Can be Used

10
Safety Precautions to Be Followed
Environments where the machine can be used
• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these
items in the vicinity of this machine. Doing so could result in fire or electric shock.
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Fire or electric shock could result
from spillage or if such objects or substances fall inside this machine.
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.
• Make sure the room where you are using the machine is well ventilated and spacious. Good
ventilation is especially important when the machine is used heavily. When you detect an odd smell,
sufficiently ventilate and circulate the air in the room.
• Keep children away from the machine. Otherwise, their hands or fingers may be caught in the gap
and injury may result.
• Keep people other than operators away from the machine. Otherwise, their hands or fingers may
be caught in the gap and injury may result.
• Use at an altitude of 2000 m or less. There is a possibility of electric shock, electric leakage, and fire
if it is used in an environment exceeding 2000 m altitude.
Handling power cords and power plugs
• Do not use any power sources other than those that match the specifications shown in this
manual. Doing so could result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.
• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.
• Do not use extension cords. Doing so could result in fire or electric shock.
• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords that
have been trapped under heavy objects, pulled hard, or bent severely. Doing so could result in fire
or electric shock.