143
4: Board Firmware Updates
Download the latest Board Firmware updates available at http://www.anaJet.com/downloads
The board update will consist of .hex file with file name consisting of the name of the board that will be
updated and can be installed on either an USB Flash Drive. Copy the board firmware to the drive.
Figure 10.4-1: Board Update File
Insert the USB Drive. In the Maintenance menu options select the board intended to be updated and
select Update Firmware and select the board that will be updated and then location where the
firmware is located.
Figure 10.4-2: Board Selection
Figure 10.4-3: Drive Selection
Select the board the firmware on the flash drive and proceed with update. Once completed, some
board updates may prompt the printer to shut down. Also, some board updates may require
the operator to toggle the power switch on the back of the printer before restarting the printer.
Figure 10.4-4: Board Update
Figure 10.4-5: Powering Off
To Next Page
Loading...
