68
Press enter on modes until static is displayed
Static IP: (192.168.x.x ) IP address of the printer should match the gateway except for the last
two sets of digits and not be used by another networked device.
Subnet mask: (255.255.x.x ), determined by the router
Gateway: (192.168.x.x), determine by the router
Figure 5.8-7: Setting Static IP
Once this is complete you can now set the Static IP in your printers control panel.
Select the digit you wish to edit
When finished press <Apply>
9: Printer Number
Figure 5.9-1: Printer Number
This setting allows you to assign your printer a specific number. This feature is very helpful when printing
with multiple Ri 3000 or Ri 6000 printers through a network connection. If each printer is assigned a
specific number, you can then choose which printer to send the print job to by selecting the
corresponding number in the Printer Name drop-down menu of the AnaRIP software.
To Next Page
Loading...
