67
Static: Static IP address is used when the router has reserved a specific address for the printer. This
allows printer to maintain a constant connection with router.
Dynamic: IP address is assigned by the router randomly whenever the printer has been disconnected
from the network for a certain duration of time. By default, the printer is set to Dynamic. If you would
like to setup a static IP, this can be done through the computer.
Go to your Start/Windows icon and click on Accessories followed by Run, the type in "command" and
press enter.
Figure 5.8-4: Run/Command
In the prompt type in "ipconfig/all"
Figure 5.8-5: ipconfig/all
Scroll up to see the subnet mask and gateway addresses.
Figure 5.8-6: Subnet Mask and Gateway Address
To Next Page
Loading...
