13
• After opening the top cover, use the prop to keep the cover raised so that it does not close
unexpectedly. Otherwise, your hand caught may be caught between the cover and the machine.
• Make sure that the top cover is closed, and then turn on the power switch on the back of the
machine. Before closing the cover, turning on the power may cause the machine to operate and
cause injury.
• Before turning on the power for the first time, remove the 2 retainer brackets that have labels
affixed. Turning on the power without removing them may cause the machine to malfunction.
• Follow the procedures in the user's manual for maintenance and securely install parts and covers.
Failure to do reliable work may cause injury or malfunction.
Handling the machine's interior
• Do not remove any covers or screws other than those explicitly mentioned in USER MANUAL.
• Before you remove the cover, turn off the power switch on rear of the machine. Removing the
cover with the power on or removing parts other than those explicitly referred to could result in
electric shock.
To Next Page
Loading...
