92
3: Scheduled Maintenance
It is very important to follow the printer maintenance schedule. If neglected, it may become necessary to
ship the unit back to a RICOH Ri 3000/Ri 6000 repair facility and put the printer through an extensive and
expensive refurbishment process. These maintenance procedures are presented in a detailed manner in
Chapter 9: Maintenance and Transportation.
4: Pre-treatment of Dark Colored Garments
• When swallowing or inhaling ink, cleaning solution, HV storage solution or pretreatment liquid, or when
getting them in the eye, follow the guidance in the appropriate safety data sheet (SDS). Download the SDS
from the AnaJet website at http://anajet.com/technical-documentation
• Place ink, cleaning solution, HV storage solution, and pretreatment liquid in a cool, well-ventilated place
out of the reach of children.
• Keep waste ink, containers for ink, cleaning solution, HV storage solution, and pretreatment liquid, and
components that have been in contact with ink out of the reach of children.
• When handling ink, cleaning solution, HV storage solution, or pretreatment liquid, avoid getting anything
on your clothing. If you do, wash the stained area with cold water.
Pre-treatment Liquid is to be used with care. Do not let it contact your eyes. Do not breathe in the vapor
or mist. Thoroughly wash your hands after handling it. If your clothing gets contaminated, wash it before
reuse. If an accident happens please follow the Caution and First Aid instructions on the Pre-treatment
Liquid bottle label.
Due to the corrosive nature of the pre-treatment solution, we recommend that all users apply pre-
treatment using gloves and a dust mask. Follow the instructions on the label. For dark garment printing,
the most critical process is proper application of Pre-treatment Solution onto the garments. Spotty or
improper application of the Pre-treatment or improper drying will result in white ink not bonding
properly with the garment fabric. This in turn will cause poor image quality and premature wash out of
the image.
For additional information, please refer to the SDS sheets located on the website at
http://anajet.com/technical-documentation
To Next Page
Loading...
