111
The Graphic file handling section what determines what changes are applied within the RIP. As
previously stated, the template file contains all relevant RIP information, image offsets, scaling,
Underbase variables and color adjustment variables. Based on the positioning setting, Align to top
position offset, Fit in placement box, aligned to top, Fit in placement box, centered, the graphic will be
positioned differently in the print output.
Align to top position offset, offsets the placement of the new graphic to the vertical offset of the graphic
used to make the template file.
Fit in Placement box, aligned to top scales the image and aligns the image to the vertical offset of the
graphic used to make the template file.
Fit in Placement box, centered scales the image and centers the image based on the size of the graphic
used to make the template file.
Figure 8.3-7 and Figure 8.3-8: AutoRIP Output
The Output section directs where the graphics will be sent to. You can choose to either send the files to
printer as save them to a folder location on the PC.
To Next Page
Loading...
