38
components that have been in contact with ink out of the reach of children.
• When handling ink, cleaning solution, HV storage solution, or pretreatment liquid, avoid getting anything
on your clothing. If you do, wash the stained area with cold water.
• When replacing the cartridge for ink, cleaning solution, HV storage solution, or pretreatment liquid, avoid
getting anything on your clothing. If you do, wash the stained area with cold water.
• When replacing the cartridge for ink, cleaning solution, HV storage solution, or pretreatment liquid, avoid
getting anything on your skin. If you do, wash the affected area thoroughly with soap and water.
• When removing the cartridge for ink, cleaning solution, HV storage solution, or pretreatment liquid, avoid
putting your hand near the location in which the cartridge is installed (such as the ink supply nozzle and its
surrounding areas). If you get anything on your hands, wash them thoroughly with soap and water.
• The ink cartridge surface may have ink on it, so be careful to avoid ink stains.
• Do not disassemble the cartridge for ink, cleaning solution, HV storage solution, or pretreatment liquid.
Doing so could leave ink stains or cleaning solution on your hands and fingers.
• When shaking the cartridge for ink, cleaning solution, HV storage solution, or pretreatment liquid, be
careful about safety of your surroundings and ink stains. Otherwise, injury or stains on household items
may result.
Your printer was shipped with the ink delivery system partially filled with Cleaning Solution to preserve the
integrity of the ink delivery system and prevent the print heads from drying out. The Cleaning Solution has
to be removed prior to filling the printer with the printing inks. Follow the procedure below to flush the
Cleaning Solution from the system. Do not install the ink cartridges at this time.
The Ri 3000 and Ri 6000 printers utilize a fully circulating ink delivery system for the White Ink Channels
that uses 2 sets of tubing. The first set is called the Print side and the second set the Purge side.
Press the menu <≡> button, then select Maintenance and press the <Fill INK> tab.
Figure 2.6-1: Startup Fill Menu
To Next Page
Loading...
