72
for internet use only that loose quality every time they are re-saved. If you are using the native Adobe
file formats of AI or PSD you must flatten all of the layers of you image and save this version for printing
your complete image.
Open the Ri 3000 or Ri 6000 AnaRIP program from your desktop.
Once the program is open you can now place the graphic you would like to use by selecting Place Image
under the File drop down in the upper left corner of the program. You may also drag and drop a graphic
into the program by clicking on the file and dragging it onto the preview are of the AnaRIP software.
You should now see your graphic in the preview screen. (See figure: 6.3-2)
Figure 6.3-1: Place Image
Figure 6.3-2: Loading Graphic into RIP
Figure 6.3-3: View Menu
At the right top of the settings you will see a drop down select for View. When printing a light garment,
you will see 3 choices.
Color Layer: This view will show your original image as it was brought into the software.
True View: This view will show what the image will look like when printed. Since the CMYK are
somewhat transparent the color of the garment will affect the final look of your printed image. To
demonstrate this, click the Textile color drop down and select a different color.
To Next Page
Loading...
