74
Figure 6.3-6: Color and True View
Color and True View: This view shows both views in the display.
The second tab will be the open default view; this tab is called Print Settings. The first option you will
encounter in the Print Settings Tab is the Printer Name drop-down. Here you can select where the print
job will be sent when the print button is pressed. If USB is selected in the Printer Name drop-down then
when the print button is pressed the job will RIP to the Ri 3000 or Ri 6000 printer that is currently
connected to the computer through the USB cable. Printing this way is similar to using any standard
desktop printer. If Ri 3000 or Ri 6000 File is selected, then the AnaRIP software will process the file to
destination of your choice. You can RIP your files to your computer’s desktop or to a folder of your
choice and print them later, or you can RIP your files to a USB Flash Drive, which can then be plugged
into the printers control panel.
Figure 6.3-7: Select Printer
If you have multiple printers, you can connect them all on a network and assign each one a number
through the printers control panel. Then when printing, you can select which printer to send the job to
by selecting it in your Printer Name drop-down. The preview will match the table platen size you have
selected. The default Platen setting is Main (14 x 18 in), if you are using a different table the table size
can be changed in the program under Platen Size and the preview print area will change to this tables
dimensions.
To Next Page
Loading...
