76
Figure 6.3-10 Platen Placements
When printing with the Small Print Adapter, remember to adjust the Print Table’s height. You can select
either Left or Right portrait orientation Pocket Platens from the Platen size selection in AnaRIP. Figure
6.3-10: Print Table with Pocket Adapter Layout and Print Origin
• Before installing or removing options, always turn off the power switch on rear of the machine.
The Print Quality will be set to Fine by default. This will be the best overall setting for light garment
printing. The other Print Quality settings are Draft, Speed and Super Fine. (Figure 6.3-11)
Figure 6.3-11: Quality selection
Draft mode is a utility that lays down a very light amount of ink for printing on paper for use to help
To Next Page
Loading...
