80
Figure 6.3-17: Rendering Intent
Rendering intent specifies the rendering intent that this step should associate with the job. Rendering
intents inform the printer what action to take when a print job includes colors that lie outside the color
range of the printer.
Perceptual (default): The printer adjusts all the colors in the image so they are all in the color range of the
printer and maintain their color relationships to each other.
Saturation: The printer substitutes the nearest color that it can print for out-of-range colors and adjusts in-
range colors to make them more vivid.
Relative Colorimetric: The printer substitutes the nearest color that it can print for out-of-range colors; in-
range colors are not adjusted.
Absolute Colorimetric: The printer substitutes the nearest color that it can print for out-of-range colors,
and then all colors are adjusted based on the white point of the media.
Figure 6.3-18 Color Controls
The Color Adjustments Tab will allow you to make adjustments to the graphics Brightness,
Contrast and Saturation. The Color Controls effect will be visible in the preview screen when they are
adjusted. (See figure 6.3-19 to 6.3-24)
To Next Page
Loading...
