82
Design File it will not be unable to locate it.)
You also have the option to save a Template, this will just save the settings and when a new design is
started these setting can be applied to the new design.
At this point you can also press Print or Print to File. Pressing print will sent the job directly to the
internal memory of the printer, The Job information will show on the printer’s display and the print
Ready LED on the control panel will light up when the printer is ready to print. Don’t press the button
yet, we will show the procedures for loading a garment in the next section.
Choosing the Print to File option will allow you to rip and save the file to your computer using a USB
drive Once the file is saved onto the media device it can be taken to the printer and placed into the
appropriate slot on the side of the Control Panel for loading and printing. (See figure 6.3-25)
Figure 6.3-25: Front USB Input Slot
Figure 6.3-26: Rear USB and
Ethernet Ports
To print a file from a USB drive, select the “Select Job from Front USB” or “Select Job from Back USB”
(Figure 6.3-25 and Figure 6.3.26) from the main screen.
You can now scroll through all the print jobs and select the file you want to print. The specific job file will
come up in the display, adjust the Copies to Print and then press the <PRINT> button to print the print
job.
Figure 6.3-27: The Jobs Menu
To Next Page
Loading...
