6. Select [WPA2] [OK] End
Step to 9.
7. Select [WPA2-PSK] Press [OK] Select [Enter]
8. Enter the Pre-Shared Key. Select [Accept]
Enter the Pre-Shared Key using between 8 and 63 ASCII characters.
Uppercase and lowercase letters are differentiated, so be sure to enter characters in the required
case.
9. Press [Menu] twice.
10. Log out.
1. Log in as the network administrator from the control panel.
2. Display the "Security Method" screen.
[System Settings] [Interface Settings] [Wireless LAN] [Security Method]
3. Set the encryption method to WPA2.
[WPA2] [WPA2 Authent. Method]
WPA2
[WPA2] [OK]
WPA2-PSK
[WPA2-PSK] Enter the Pre-Shared Key [OK]
Enter the Pre-Shared Key using between 8 and 63 ASCII characters.
Uppercase and lowercase letters are differentiated, so be sure to enter characters in the required
case.
4. Complete the setting.
[OK] [OK]
5. Log out.
• To set the encryption method to [WPA2], you must specify IEEE 802.1X. For details, see page 147
"Configuring IEEE 802.1X Authentication".
•
This can also be specified via Web Image Monitor. For details, see Web Image Monitor Help.
5. Enhanced Network Security
146
To Next Page
Loading...
Need help?
General
Weight and Dimensions
