2. Number of Attempts before Lockout
The number of times a user may enter a login password is recorded.
3.
Lockout Release Timer
Whether the lockout release timer is active (Active) or inactive (Inactive) is recorded.
4. Lock Out User for
The time until lockout release is recorded.
Auto Logout Timer
1. Auto Logout Timer
Whether an auto logout time is set to (On) or (Off) is recorded.
2. Auto Logout Time(seconds)
The time until lockout release is recorded.
Device Certificate
1. Operation Mode
The type of operation is recorded.
"Create" is recorded when a certificate is created.
"Delete" is recorded when a certificate is deleted.
"Install" is recorded when a certificate is installed.
When the certificate to be used is changed, "Change Application to Use Certificate" is
recorded.
When an intermediate certificate is installed, "Install Intermediate Certificate" is recorded.
When an intermediate certificate is deleted, "Delete Intermediate Certificate" is recorded.
2. Certificate No.
The number of the certificate to be used is recorded.
3. Certificate No. (XXX)
(XXX) is replaced by one of the following:
• IEEE 802.1X(WPA/WPA2)
• IPsec
The number of the certificate for applications is recorded.
When a certificate is not used, "Do not Use" is recorded.
IPsec
1. IPsec
Whether IPsec is active (Active) or inactive (Inactive) is recorded.
2. Encryption Key Auto Exchange: Setting1-4: Remote Address
7. Managing the Printer
194
To Next Page
Loading...
Need help?
General
Weight and Dimensions
