Problem Causes Solutions
Print speed or application
relinquishing speed is slow.
The printer driver settings are
not configured correctly.
PCL 6
On the printer driver's
[Detailed Settings] tab,
click [Print Quality] in
"Menu:", and then select
[Speed] in the "Print
Priority:" list.
For details about the printer
driver settings, see the printer
driver Help.
Quit any other applications.
Print ends mid-job. An error might have occurred. Check the printer's display
panel to see if an error has
occurred.
A print instruction was issued
from the computer, but printing
did not start.
User Authentication may have
been set.
For details about User
Authentication, see "Configuring
User Authentication", Security
Guide.
PDF files do not print out/
cannot perform PDF direct print.
PDF files are password-
protected.
To print password-protected
PDF files, enter the password in
[PDF Menu].
PDF files do not print out/
cannot perform PDF direct print.
PDF files cannot be printed if
they are print-disabled in PDF
file security setting.
Change the PDF file security
setting.
PDF direct print produces
strange or malformed
characters.
Fonts were not embedded. Embed fonts in the PDF file you
want to print, and then print.
"Resetting job..." appears and
printing is suspended.
Memory is insufficient. In [System], select [Memory
Usage] to [Font Priority].
Printing did not start even
though the specified print time
has already passed.
The time set on the printer or
computer is incorrect.
Set the correct time on the
printer or computer.
Printing via wireless LAN is
slow.
The number of jobs exceeds the
capacity of the printer.
Reduce the number of jobs.
Other Printing Problems
105
To Next Page
Loading...
Need help?
General
