Ricoh SP 5300DN User Manual

Loading Paper into the Bypass Tray
• For details about trays that can be loaded for each paper size and type, see page 48 "Paper Size
Specifications" and page 51 "Paper Type Specifications".
• Make sure the paper stack does not exceed the upper limit mark. Excessive stacking can cause
paper jams.
• Do not mix different types of paper.
• After loading paper, specify the paper size and type using the control panel. When printing a
document, specify the same paper size and type in the printer driver as specified on the printer.
• When loading label paper, load it one by one.
• Paper feeding conditions and printing quality may vary depending on the paper thickness and
width. Be sure to perform test printing using the same paper beforehand.
1. Open the bypass tray.
DPL019
Pull the extender out when loading A4 , 8
1
/
2
× 11 or larger paper.
DPL020
2. Loading Paper
60

Ricoh SP 5300DN Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Memory	2 GB
Connectivity	USB 2.0, Ethernet
Processor Speed	1.46 GHz
Maximum Paper Size	A4
Maximum Paper Capacity	2, 600 sheets
Duplex Printing	Yes
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter
PDL	PCL5e, PCL6, PostScript 3
Operating System Compatibility	Windows, Mac, Linux