Ricoh SP 5300DN User Manual

Loading Orientation-Fixed Paper or Two-Sided
Paper
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not print correctly, depending on how the paper is placed.
Settings using the control panel
Set [Letterhead Setting] to [Auto Detect] or [On (Always)], and then place the paper as shown in
the table below. For details about [Letterhead Setting], see "Machine Modes", Operating
Instructions.
Paper orientation
The meanings of the icons are as follows:
Icon Meaning
Place or load paper printed side face up.
Place or load paper printed side face down.
Print side Trays 1–4 Bypass tray
One-sided
Two-sided
• To print on letterhead paper when [Letterhead Setting] is set to [Auto Detect], you must specify
[Letterhead] for the paper type in the printer driver's settings.
2. Loading Paper
62

Ricoh SP 5300DN Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Memory	2 GB
Connectivity	USB 2.0, Ethernet
Processor Speed	1.46 GHz
Maximum Paper Size	A4
Maximum Paper Capacity	2, 600 sheets
Duplex Printing	Yes
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter
PDL	PCL5e, PCL6, PostScript 3
Operating System Compatibility	Windows, Mac, Linux