Installing Options
By installing options, you can improve printer performance and expand the available features.
Order of Option Installation
When installing multiple options, the following order is recommended:
1. Attach the paper feed unit.
Attach the paper feed unit to the bottom of the printer.
You can attach up to four paper feed units. Up to 2,000 sheets of paper can be loaded.
2. Install the caster table.
3. Install the optional interface board.
Install in the slot of the printer.
Only one interface board can be installed.
4. Insert SD card options.
Insert in the SD card slot of the printer.
There are two slots for SD cards.
Each slot supports different types of SD cards.
If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or
service representative.
Attaching the 500-sheet paper feed unit
You can install a 500-sheet paper feed unit.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• The printer weighs approximately 18 kg (40 lb.).
• When moving the machine, use the inset grips on both sides, and lift slowly in pairs. The
machine will break or cause injury if dropped.
• Lifting the paper feed unit carelessly or dropping may cause injury.
1. Getting Started
16
To Next Page
Loading...
Need help?
General
