Ricoh SP 5300DN User Manual

Configuring settings
After installing and connecting the USB device server to the printer, configure the printer settings.
• When using the USB device server, set [Engy Sv Md to Dsbl Prt Srv] to [Disable mode] to prevent
the printer from entering Energy Saver mode. Otherwise, the USB device server loses
communication with the network while the printer is in Energy Saver mode, and the printer cannot
receive print jobs.
1. Select [System] Press [OK]
2. Select [Engy Sv Md to Dsbl Prt Srv] Press [OK]
3. Select [Disable Mode] Press [OK]
Installing SD Card Options
• Keep SD cards or USB flash memory devices out of reach of children. If a child accidentally
swallows an SD card or USB flash memory device, consult a doctor immediately.
• Do not subject the card to physical shocks.
1. Turn the printer off and unplug the power cord.
2. Open the rear cover.
DPL040
1. Getting Started
24

Ricoh SP 5300DN Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Memory	2 GB
Connectivity	USB 2.0, Ethernet
Processor Speed	1.46 GHz
Maximum Paper Size	A4
Maximum Paper Capacity	2, 600 sheets
Duplex Printing	Yes
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter
PDL	PCL5e, PCL6, PostScript 3
Operating System Compatibility	Windows, Mac, Linux