Ricoh SP 5300DN User Manual

6. Hook the two tabs on the outside of the interface cover.
DPL044
7. Hook the tab on the interface cover, which is located on the side of the rear cover.
DPL045
8. Close the rear cover.
DPL046
9. Plug in the power cord, and then turn on the printer.
10. Check that the SD card was installed correctly.
• You can confirm that the SD card was installed correctly by checking the control panel menu or
configuration page.
• VM card: Make sure [JavaTM/X] appears when the [Switch Functions] key is pressed.
1. Getting Started
26

Ricoh SP 5300DN Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Maximum Memory	2 GB
Connectivity	USB 2.0, Ethernet
Processor Speed	1.46 GHz
Maximum Paper Size	A4
Maximum Paper Capacity	2, 600 sheets
Duplex Printing	Yes
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter
PDL	PCL5e, PCL6, PostScript 3
Operating System Compatibility	Windows, Mac, Linux