4. Squeeze the end guide and slide it inward to match the standard size.
When loading paper that is larger than A4 or 8
1
/
2
× 11 , push the button, and then pull the
end guide out to match the paper size.
5. Load the new paper stack print side down.
Make sure paper is not stacked higher than the upper limit (upper line) marked inside the tray.
6. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively may cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
2. Loading Paper
58
To Next Page
Loading...
