4. Select [Paper Type: (tray name)] Press [OK]
5. Select [Envelope] Press [OK]
6. Press [Escape]
7. Select [Maintenance] Press [OK]
8. Select [General Settings] Press [OK]
9. Select [Envelope Setting] Press [OK]
10. Select the source tray for which you want to change the paper thickness Press [OK]
11. Select the paper thickness Press [OK]
• For details about the envelope types that can be loaded in each tray, see page page 48 "Paper
Size Specifications" and page 51 "Paper Type Specifications".
• For details about how to load envelopes, see page 64 "Loading Envelopes".
• Configure the paper settings appropriately using both the printer driver and the control panel. For
details about paper settings using the printer driver, see page 66 "Printing on Envelopes with
Windows (PCL 6/PostScript 3)", page 66 "Printing on Envelopes with Windows (PCL 5e)",
page 67 "Printing on Envelopes with OS X".
Paper Settings
71
To Next Page
Loading...
