Rigol DG1022

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG1022
3-17
Figure 3-15
Output the Same Signal (Lissajous Figure)
Analysis: No phase deviation, Lissajous Figure display as a straight line.
Now press Utility  Coupling  Switch  “Coupling On”  PhaDev, use the keypad
to input “90” and choose the unit of “°”. Press Aligpha again in Figure 3-13, view the
waveform output in the Oscilloscope.
Figure 3-16
Output Signals with 90° Phase Deviation
Analysis: 90° phase deviation, waveforms do not overlap.