Error Messages
1. Sorry, unable to N-Cycle burst with noise.
Noise cannot be used in the N-Cycle mode; it can only be used in the gated burst.
2. Please select a valid file.
If the selected place is empty when recall or delete a file, this message will
appear.
3. No Arbitrary waveform in buffer.
If not arbitrary waveform has edited, press Store/Recall Type “Data”
Store, this message will appear.
4. Sorry, Channel2 does not support.
If current selected channel is CH2, when press Mod / Sweep / Burst, this
message will appear to inform users that Channel2 does not support modulation,
sweep and burst functions.
To Next Page
Loading...
