RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG1022
4. Save the Waveform to the Non-Volatile Memory
Press Arb Edit Create EditPt Save, enter the following interface. Select
the desired location (ARB1~ARB10) used to save, which will be displayed in
inverse color and press Store to save it to the specific place.
Figure 2-31
Operation Menu
Instructions
To save the Arbitrary Waveform:
In the Non-volatile Memory, each waveform storage place can only save one
waveform. If a new one is stored, the old one will be erased.
After the storage, press Recall to read the waveform to volatile memory. Press View,
the edited waveform is shown in the following figure.
Figure 2-32
Waveform under the Graph Mode
Default Arbitrary
Waveform
To Next Page
Loading...
