To Save the Instrument State
Users are allowed to store the instrument state on any of the 10 Non-Volatile
Memories. The state storage will “memorize” the selected function (including the
Arbitrary Waveform), Frequency, Amplitude, DC Offset, Phase, Duty Cycle, Symmetry,
and other modulation parameter used.
To Save the Instrument State, following the steps:
(1) Choose the file Type to store
Press Store/Recall State, and choose the storage type to be “State”.
(2) Choose the location of the file.
There are ten positions in the Local STATE1, STATE2……STATE10, choose one of
them by rotating the knob.
(3) Name the file and Save it
Press Store button, enter the desired name. Press Store to finish.
To Next Page
Loading...
