To Use USB storage
As shown in Figure 2-50, the storage location is divided into: the inherent Local
storage and the USB storage. At the left side of the front panel, there is a USB
interface. When USB flash drive is connected, the storage menu will show “U Disk”.
Otherwise, the default location is the internal location Local.
Figure 2-50
To use the USB Storage
(1) Install the USB flash drive
Insert the mobile memory to the USB interface on the front panel, and the screen
will show “ ”.
(2) Choose the USB Disk
Press Disk, move the cursor upward or downward to select “U Disk”. Choose
“Data” or “State” and press Store. Enter the file name and then press Store to
save the file.
(3) Uninstall the USB flash drive
Remove the USB flash drive, the “ ” Sign will disappear.
To Next Page
Loading...
