2. Chinese Input
The Chinese Input Interface is shown in the following figure. To save a new file,
follow the instructions below:
Figure 2-53
Chinese Input Interface
(1) Press Lang CN, enter the Chinese Input Interface.
(2) Press “+/-”to choose the lowercase, and input the spell of the Chinese.
(3) Input the file name: “新文件”
Use the Knob to adjust the cursor to the right character, and press Select. Input
“Xin”. In the Input Menu, choose the Chinese character you need with the help
of the page controller and the 1~9 button on the keypad.
(4) Edit the wrong input
When a file name is wrong, move the cursor to the character and press Remove
to delete it and enter the file name again.
(5) Press Store to finish and save the file.
To Next Page
Loading...
