RIGOL
User’s Guide for DSA1000 Series
is from 10 MHz to 3 GHz).
Appropriate Use of Power Meter.
If you are not sure of the characteristics of signal under measure, follow these
recommendations to ensure safe operations: if a RF power meter is available, use it to
measure the power level of this signal first; or add a rated external attenuator
between signal cable and input terminal of the instrument. Maximum attenuation,
reference level and maximum span frequency should be selected, so as to make the
signals displayed within the screen.
Know About the Specification Conditions of the Instrument.
For maximum performance of the instrument, use the analyzer under specified
conditions.
Proper Use of Battery.
The battery must not be exposed to high temperature or in contact with fire. Keep it
out of the reach of children. Improper change of battery (note: lithium battery) may
cause explosion. Use RIGOL specified battery only.
Handling Safety.
Please handle with care during transportation to avoid damages to buttons, knob,
interfaces and other parts on the panels.
To Next Page
Loading...
Need help?
General
