Rigol DSA1000 Series User Manual

Quick Start RIGOL
User’s Guide for DSA1000 Series
1-3
1.1.1 Front Panel Function Key
Figure 1-2 Function key area
Table 1-2 Function keys description
Keys Description
Sweep keys
Sets the center, start and stop frequency, as well as the signal
tracking function.
Sets the frequency sweep span.
Sets the reference level, RF attenuator, scale and the unit of Y-axis,
etc.
Sets the Resolution Bandwidth and Video Bandwidth of the analyzer.
Sets the sweep time, sweep mode, sweep numbers in single mode
and the sweep points.
Searches signals automatically within full frequency range.
Function setup Advanced measure Marker measure
Basic keys Sweep keys System k
eys

Rigol DSA1000 Series Specifications

General

Brand	Rigol
Model	DSA1000 Series
Category	Measuring Instruments
Language	English