Risco Agility Software Manual

 AgilityConfigurationSoftwareManual
Page 28

Figure19:Remote GSMconnectionse t up
2. ClickOK.
TCP/IP Ethernet communication
¾TodefineTCP/IPEthernetcommunication,setuptheparametersasfollows:
1. SelecttheTCP/IPcommunicationchannelfromthedrop downlistan d fillin the
parametersasfollows:
IPAddress:The PCIPaddressisdisplayedby default.Inthecaseoftwonetwork
interfacecardsselectthe
relevantIPaddressfr omthedropdownlist
Port:Selecttherelevantport

Figure20:TCP/IPEthernetconnectionsetup
2. ClickOK.

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup