Riso 3050 - Paper and Originals Handling

17
Preparations for Use >> Paper and Originals
1
Usable Paper
If you use paper that is not compatible with this machine, it may result in problems such as paper jamming, soiling or
malfunctions.
Paper Basic Specications
Feed Tray Standard Tray
Size
182
mm × 182 mm – 297 mm × 420 mm
(7
3
/
16
" × 7
3
/
16
" – 11
11
/
16
" × 17")
90 mm × 148 mm – 340 mm × 550 mm
(3
9
/
16
" × 5
13
/
16
" – 13
3
/
8
" × 21
5
/
8
")
Weight
52
g/m
2
– 104 g/m
2
(14-lb bond – 28-lb bond)
46 g/m
2
– 210 g/m
2
(12-lb bond – 56-lb bond)
Paper Type
Standard paper, recycled paper Standard paper, recycled paper, envelopes, postcards,
postcards (inkjet)
Maximum
Load
500 sheets in each tray*
(or heigh
t up to 50 mm (1
15
/
16
"))
1000 sheets*
(or heigh
t up to 110 mm (4
5
/
16
"))
*
When the weight is 85 g/m
2
(23-lb bond)
Even if the paper is within the machine’s “paper size” and “paper weight” specications, the paper may not be able to pass through
the machine because of the paper’s texture, or conditions such as the environment or storage conditions. For details, please contact
your dealer (or authorized service representative).
Do Not Use These Paper Types
Do not use the following paper types as they will cause problems such as paper jamming or malfunctions.
• Paper that does not comply with the conditions in the basic
specications
•
Paper with a processed surface, such as thermal paper or
carbon paper
•
Curled paper (3 mm (
1
/
8
") or more)
• Paper with wrinkles
• Bent paper
• Torn paper
• Paper with ripples
• Coated paper such as art paper
• Paper with jagged edges
• Glued paper
• Paper with holes
• Gloss paper for photographs
• Transparencies (for overhead projectors)
• Synthesized paper (Yupo)
Paper Storage and Handling
• Always use paper from a sealed package. After nishing the print job, return the unused paper from the standard tray to the
package and store. If you leave the paper in the standard paper feed tray, the paper may curl and cause paper jamming.
•
If the paper is not cut very well or if the paper has a textured surface (such as drawing paper), fan the paper before use.
• Store the paper horizontally in a place with low humidity.
How you handle the originals and the paper will
signicantly aect the copy and print output. It is also
important to know the correct
handling methods and
conditions, because doing so
will prevent problems such as
paper jamming. This section
describes how to handle
originals and paper.
Paper and Originals
ComColor Series Basic Guide 02
ComColor Series Basic Guide 02