Riso 3050 - Image Size; Color Mode

58
⑤ [Reproduction size]
Specify scanning at enlarged or reduced sizes.
[Reproduction size] is available only when you specied
[200dpi] or [300dpi] as the [File format] resolution.
[Auto]
Originals are scaled automatically during scanning.
[100% (1:1)]
Scan at the original size.
Preset Scaling
Select from preset scaling levels.
[Numerical input]
Enter a desired scaling value, in a range of 50–200%.
⑥ [Image size]
Specify the size for saving scanned images.
[Auto]
The scanning size is automatically calculated and set from the
original size and reproduction size.
[Numerical input]
Use [▲] and [▼] or the numeric keys to enter the desired value.
Image size list
Select sizes from the list displayed.
⑦ [Color mode]
Specify color or monochrome scanning.
[Auto]
Color or monochrome scanning is selected automatically.
[Full color]
Scan in color.
[Grayscale]
Scan in grayscale.
[Black]
Scan in black and white (two levels).
⑧ [Scanning level]
Specify the scanning density for scanned images.
⑨ [Duplex/Simplex]
When scanning duplex originals, specify the type of original.
ComColor Series Basic Guide 02