Page 2 DCN 4727 REV 6 Doc No. C29115
Rittal Legal Disclaimer
The user and safety information provided (i) in the leaflet “Important Microsoft MOR User
Documentation” (the “Leaflet”), (ii) the Rack and Accessories Installation Manual MOR Generation 6 (the
“Manual”) and (iii) on the web pages set forth on the leaflet ((i) – (iii) together the “Instructions”) is
mandatory to accompany the product during its whole life cycle to ensure a safe operation and handling
of the product.
The recipient of the product shall ensure to forward the provisions set forth by the Instructions to the
officer responsible for health and workplace safety in the receiving organisation. It is essential that the
recipient and the staff handling the product are familiar with the provisions of the Instructions before
handling it and fully comply with the provisions of the Instructions at any time. In case of any questions
related to the Instructions, please contact the manufacturer at support_msft@rittal.com before initially
handling or continuing to handle the product. The manufacturer updates the Instructions from time to
time and publishes the revised version thereof on the webpages set forth on the leaflet.
If a product is sold or otherwise transferred to another recipient, the original recipient shall ensure that
the product is accompanied by the Leaflet and the Manual.
The Instructions provide information, to set up a detailed operational, site specific handling and
education plan for the individuals handling the product. The information contained in the Instructions has
been prepared solely for the intended use expressly authorised by the manufacturer in the Instructions.
The manufacturer shall not be liable for any damage suffered by any unauthorised use of the product.
The manufacturer has made every attempt to ensure the accuracy and reliability of the information
provided in the Instructions. However, the information is provided “as is” without warranty of any kind.
The manufacturer does not accept any responsibility or liability for the accuracy or completeness of the
information contained in the Instructions. The manufacturer further assumes no liability for any injuries,
damages, violations of codes, improper installation, system failure, or any other damages suffered that
arise from the violation, negligence or concealment of the content provided by the Instructions.
To Next Page
Loading...
