Rittal 7844440 - Rack Grounding

Page 28 DCN 4727 REV 6 Doc No. C29115
Rack Grounding
WARNING
HAZARD OF ELECTRIC SHOCK
• Connection of the rack to building Common Bonding Network (CBN) is required.
Failure to follow these instructions can result in death, serious injury or equipment
damage.
• Each rack should be bonded directly to a common ground using the designated grounding points
located at the top of the RH and LH 300W racks.
The rack roofs and front doors will
be supplied grounded via cable
(cable not connected in model).
The frames will be supplied grounded via cable (cable
not connected in model).