Page 13 DCN 4727 REV 6 Doc No. C29115
Product Safety Statements
The given product safety statements apply to all action undertaken with the product over the entire life cycle
of the product, from product receiving to disposal.
Statement 1
In regards to receiving, moving the rack when attached to pallet and forward shipping after integration, the
following warnings must be upheld:
TIP / HEAVY EQUIPMENT HAZARDS
RISK OF PRODUCT DAMAGE
• This rack is easily tipped. Use extreme caution when handling.
• Instructed or Skilled logistics persons to handle rack only.
• People handling the rack must wear PPE in accordance with local risk assessments and local
regulations.
• Palletised rack must not exceed maximum tip of angle of 15 degrees.
• Rack must be forklifted from the rear of the rack only (as per packing sleeves indicates).
• Racks can be moved with manual pallet truck from front and rear only (as per packing sleeves
indicates).
• All other forms of transportation are forbidden.
• Rittal products must be shipped in accordance with Rittal Handling guidelines for shipping and
storage.
o (http://www.rittal.com/imf/none/5_501/Rittal_Handling_guidelines_for_shipping_and_stora
ge_5_501)
• Do not remove rack pallet braces or front and rear bolt down brackets.
• Ensure all packaging is replaced as delivered.
• Ensure pallet wood spacers (x4) are removed before rack configuration.
• Please check pallet brace and bolt down bracket bolt torques before forward shipping.
• Failure to follow these instructions can result in death, serious injury or equipment
damage.
WORKING WITH RACK
• This rack is easily tipped. Use extreme caution when handling.
• Instructed or Skilled persons to handle rack only.
• PPE in accordance with local risk assessments and local regulations to be worn.
• Only use safety knife (example shown) when opening packaging.
Example only
Failure to follow these instructions can result in injury or equipment damage.
To Next Page
Loading...
