Rittal 7844440 - Joining and Bolting Down Rack; Bolt-down Method- Bolt-down Kit

Page 30 DCN 4727 REV 6 Doc No. C29115
Joining and Bolting Down Rack
WARNING
TIP / HEAVY EQUIPMENT
• This rack is easily tipped. Use extreme caution when handling.
• Instructed or Skilled persons to handle rack only.
• People handling the rack must wear PPE in accordance with local risk assessments and local
regulations.
• Rack must be bolted down using kit 7844246
Failure to follow these instructions can result in death, serious injury or equipment
damage.
Racks should be bayed to another rack and bolted to the floor before the equipment is installed.
Use joining and bolt-down kits supplied by Rittal only.
Bolt-down Method- Bolt-down Kit
Contents List
Item
Description
Qty.
1
Bracket
2
2
Bolt down bracket
2
3
M8 Flat washer
8
4
M8 Spring washer
8
5
M8x20 bolt
8
Part No
Description
7844246
Bolt-down Kit REV 2