WORKING WITH RACK
• This rack is easily tipped, ensure rack is secured.
• Instructed or Skilled persons to handle rack only.
• People handling the rack must wear PPE in accordance with local risk assessments and local regulations.
Failure to follow these instructions can result in injury or equipment damage.
Notes: To be applied to bayed racks. Surfaces should be free from dirt.
1. Cut strip to appropriate length. Note magnetic strip to be cut so that it goes between the baying brackets.
2. Position as shown between racks.
Please note images are for visual representation only and may differ from actual rack but process remains the same.
-------------------------------------------------------------End of Manual-------------------------------------------------------
To Previous Page
Loading...
