RKI Instruments GD-70D Series User Manual

- 17 - GD-70D
Do not install the detector in a place exposed to direct
sunlight or sudden changes in the temperature.
Avoid installation locations where the detector is exposed to
direct sunlight or radiant heat (infrared rays emitted from a high-
temperature object), and where the temperature changes
suddenly. Condensation may form inside the detector, or the
detector cannot adjust to sudden changes in the temperature.
Keep the detector (and its cables) away from
noise source devices.
Avoid installation locations where high-frequency/high-voltage
exist.
Do not install the detector in a place where maintenance of the detector cannot be
performed or where handling the detector involves dangers.
Regular maintenance of the detector must be performed.
Do not install the detector in a place where the equipment must be stopped when maintenance is
performed, where parts of the equipment must be removed to perform maintenance, or where the detector
cannot be removed because tubes or racks prevent access to it. Do not install the detector in a place
where maintenance involves dangers, for example, near a high-voltage cable.
Do not install the detector in equipment which is not properly grounded.
Before installing the detector in equipment, the equipment must be grounded properly.
Do not install the detector in a place where other gases exist around it.
The detector must not be installed in a place where other gases exist around it.

RKI Instruments GD-70D Series Specifications

General

Brand	RKI Instruments
Model	GD-70D Series
Category	Gas Detectors
Language	English