robatherm RM Series - Hydraulic Set; Commissioning and Checks

Commissioning and Maintenance
© robatherm 67
Characteristic Release and Application Pressure
A Release pressure (Pa)
B Number of weight plates (pcs)
C a-distances (mm)
Pos: 72.8 /Inbetri ebnahme und Wartung/_W artung @ 0\mod_125792958525 7_2008.doc @ 2117 @ 3
Maintenance
Pos: 72.9 /Inbetri ebnahme und Wartung/W artungsintervall_1Jahr /ATEX monatlich @ 0\ mod_1258478957281_2008. doc @ 2243 @ 4
Maintenance Interval
Every year. ATEX units every month.
Pos: 72.10 /Sicher heitshinweise/!Vor sicht_Sicherheits hinweise beachten_ Querverweis @ 0\mod_12577 77093652_2008.doc @ 2112 @
Caution
Observe general safety instructions on page 3!
Pos: 72.11 /Inbetri ebnahme und Wartung/Über druckklappe/Über druckklappe_Wartung @ 0\ mod_1258478999684_20 08.doc @ 2244 @
Pressure Relief Damper – Periodic Maintenance
 Check pressure relief damper for function, foreign bodies, contamination, damage and
corrosion
 Treat all moving parts with lubricating and preserving spray
 Treat sealing with Vaseline
 Check release pressure, adjust if necessary.
Pressure Relief Damper – Maintenance when necessary
 Clean pressure relief damper and rectify any damage and corrosion
 Clean with a wet cloth, use grease or oil dissolving agents if necessary
Pos: 73 /Layout/Seite numbruch @ 0\mod_12566286 15637_0.doc @ 2284 @