robatherm RM Series - Controlling Systems

Commissioning and Maintenance
68 © robatherm
Pos: 74.1 /Überschri ften/__MSR-Technik @ 0\mod_1257341721201_ 2008.doc @ 2057 @ 2
Controlling Systems
Pos: 74.2 /Inbetri ebnahme und Wartung/_Inbe triebnahme @ 0\mod_12579 29574289_2008.doc @ 2116 @ 3
Commissioning
Pos: 74.3 /Sicher heitshinweise/!Vor sicht_Sicherheitshi nweise beachten_Quer verweis @ 0\mod_125777 7093652_2008.doc @ 2112 @
Caution
Observe general safety instructions on page 3!
Pos: 74.4 /Sicherheitshinweise/IBN&Wartung/!IBN&Wartung_ATEX-Bauteile erden @ 0\ mod_1257956926546_2 008.doc @ 2126 @
Only use approved parts with ATEX units. All electrical parts must be earthed.
Pos: 74.5 /Inbetri ebnahme und Wartung/MSR- Technik/MSR-Techni k_IBN_Voraussetzunge n @ 0\mod_12585403339 40_2008.doc @ 2245 @ 44
Requirements
All construction requirements such as access, completed unit and duct installation and
uninterrupted availability of all supply facilities must be met. In addition there must be a
possibility of operating the system in the required working phases.
The commissioning may only be undertaken by a qualified company which specialises in
process measurement and control technology.
At the start of the commissioning work, the commissioning engineer will be shown the
system specific locations by a person nominated by the customer.
Work
The following work must be carried out:
 Check correct installation of the field units
 Check the electrical connections on the switchgear cabinet and the field units
 Functional test of sensors, transducers and actuators included in the supply package
 Configuration of control and/or DDC substations including loading of project specific
control and SPS programmes
 Commissioning with all connected data stations
 Adjustment of the parameters to the operating conditions of the technical system, setting
and regulation to the specified rated values and reference variables
 Testing of the control programmes
 Briefing nominated operating staff during the course of commissioning work
Pos: 74.6 /Inbetri ebnahme und Wartung/_W artung @ 0\mod_125792958525 7_2008.doc @ 2117 @ 3
Maintenance
Pos: 74.7 /Inbetri ebnahme und Wartung/MSR- Technik/MSR-Techni k_Wartung_Wartungsper sonal @ 0\mod_12585404 67905_2008.doc @ 2246 @ 44
Maintenance Staff
Maintenance work must only be carried out by a qualified expert.
Maintenance Contract
A maintenance contract with a company which specializes in process measuring and control
technology is recommended.
Pos: 74.8 /Inbetri ebnahme und Wartung/W artungsintervall_1Jahr /ATEX monatlich @ 0\ mod_1258478957281_2008. doc @ 2243 @ 4
Maintenance Interval
Every year. ATEX units every month.
Pos: 74.9 /Sicher heitshinweise/!Vor sicht_Sicherheitshi nweise beachten_Quer verweis @ 0\mod_125777 7093652_2008.doc @ 2112 @
Caution
Observe general safety instructions on page 3!
Pos: 74.10 /Layout/Leer zeile @ 0\mod_125662865 4328_0.doc @ 2285 @