robatherm RM Series - Shut down; Disassembly, Disposal

Shut Down
74 © robatherm
Pos: 78 /Überschrif ten/_Stilllegung @ 0\ mod_1256570208285_2008. doc @ 2012 @ 1
Pos: 79 /Überschrif ten/__Außerbetri ebsetzung @ 0\mod_1257342 099134_2008.doc @ 2060 @ 2
Shut Down
Pos: 80 /Sicherhei tshinweise/!Vorsic ht_Sicherheitshi nweise beachten_Quer verweis @ 0\mod_125777709 3652_2008.doc @ 2112 @
Caution
Observe general safety instructions on page 3!
Pos: 81 /Stilllegun g/Außerbetriebsetzu ng @ 0\mod_1260807151804 _2008.doc @ 2277 @
If the system is to be shut down for a longer period the instructions for the individual
components must be observed. Additionally it is compulsory to observe the individual
component manufacturer’s information (request if necessary)!
Take the risk of freezing in winter into account in particular.
Pos: 82 /Überschrif ten/__Abbau, Entsorgun g @ 0\mod_1257342100383_ 2008.doc @ 2061 @ 2
Disassembly, Disposal
Pos: 83 /Sicherhei tshinweise/!Vorsic ht_Sicherheitshi nweise beachten_Quer verweis @ 0\mod_125777709 3652_2008.doc @ 2112 @
Caution
Observe general safety instructions on page 3!
Pos: 84 /Stilllegung/ Abbau und Entsorgung @ 0\ mod_1260807197583_2008. doc @ 2278 @
Only an authorised company is allowed to disassemble the unit after the service life has
expired. Please observe the safety regulations for every component as well as the
component manufacturer’s instructions to avoid any damage to persons or property.
All components and resources (e.g. oils, refrigerant, brine, batteries) must be disposed of in
line with local regulations. All metal and plastic parts should be separated and sent for
recycling.
Injection moulding parts are provided with material identification; plastic extrusions are
usually made of polyvinyl chloride (PVC).
=== Ende der Liste für Textmarke Inhalt ===
Shut Down