Roberts Rambler Max - Before You Can Use this Product

3
Before you can use this product
Before you can use your radio, you must have the following:
● A broadband Internet connection (not required for DAB, FM or Music Player functions).
● A router providing a WiFi signal, connected to your broadband Internet service.
● To use remote control features in the Oktiv app you will need a smart phone or tablet which uses either the
Android operating system (version 8.0 or later) or Apple iOS (version 13.0 or later).
● If your WiFi network requires a security password to allow connection, then you either need to know the
password used for encryption so that you can get the radio to communicate with the network, or your router
needs to offer WiFi Protected Setup (WPS).
The radio's WiFi system is compatible with 802.11b, g, n or a networks and can use 2.4 GHz or 5 GHz WiFi
frequency bands.
The radio will typically work within a 10-20 metre radius from your broadband router. The actual range achieved
will depend upon the building type, other nearby WiFi networks, and possible interference sources. DAB and FM
radio functions can operate wherever the radio is able to receive a suitable broadcast signal.
YouwillrstneedtoconnectyourradiotoyourWiFinetworkseeConguration,page9onwards.
Onceconnected,yoursmartradiowillcheckforanysoftwareupdates.
Detailsonupdatingyoursmartradiocanbefoundonpage49.
IMPORTANT: Before you continue, make sure that your router is powered up and working with your broadband
Internet service (use your computer, smart-phone or tablet to verify this). To get this part of the system working
you must refer to the instructions supplied with those items.
FM
DAB
60