EasyManua.ls Logo

Roberts Rambler Max - Changing the Network Connection

Roberts Rambler Max
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Connectingtoyourcomputernetwork-cont.
If you have followed the steps on the preceding pages successfully, your radio will have connected to your
router, and then made a connection to the Internet and set its clock.
Youcannowlistentoradiostationsviatheinternetandusetheotherfeaturesofyourradio(see
page17onwards).
Changingthenetworkconnection
In the sections above, you chose how your radio would be connected to your network, using a WiFi
connection. If you change your broadband supplier or change location, you may nd that you need to
connect to a different WiFi network. The Network Settings menu allows you to change your radio’s network
settings, scan for an alternative WiFi network, or manually congure the network parameters.
The steps outlined below describe how you can do this - see also the section 'Network proles' on page 49.
If you have no need to do this, however, please skip to page 17.
ConguringtheradiotouseanalternativeWiFiconnection
1. From the Network Settings menu select 'Network wizard'. This will present you with details of any WiFi
networks that are found. Scroll down the list using the Tuning/Select control to the desired network
name. Press the control to select this network.
The radio will then use its WiFi system to communicate with the network. Depending on the settings for
the new network you may need to enter an encryption key (see pages 13-14). By default the radio will
then acquire an IP address and other network settings from the network's router automatically using
a system known as DHCP.
2. Instead of the 'Network Wizard' option, the 'PBC Wlan Setup' option can be used if you know that the
new network supports WiFi Protected Setup (WPS). You will then be asked to press the WPS button
on your router. Then press the Tuning control to initiate the connection process.
Equaliser
Audio Quality
Network
Time/Date
Brightness
Inactive Standby
System Settings
Network Wizard
PBC Wlan Setup
View Settings
Manual Settings
NetRemote PIN Setup
Network Profile
Network Settings
Network Settings
Network Wizard
Scanning...
Last Listened
Station List
Recall Preset
Save Preset
Sleep
Alarms
Internet Radio 10:30
10:30
10:30
10:30
FM
DAB
60

Table of Contents

Related product manuals