50
Information.
Softwareversiondisplay
A display showing the software versions and other information is provided for
reference and customer support purposes.
1. Press Menu. Choose 'System Settings' and then 'Info'. The display will show
the software version and radio ID. Rotate Tuning to display further information.
2. Press Menu to exit.
Inactive Standby
Language
Factory Reset
Software Update
Setup Wizard
Info
System Settings
SW version:
ir-cui-FS2340-0000-0547
V4.10.8.9d8d4a-1A21
Spotify version:
HEAD-v3.200.445-gf142e7f9
Info
Radio ID:
123456ABCDEF
Friendly Name:
Rambler Max
Info
1. Press Menu and choose 'System Settings', 'Network' and then 'View Settings'. The current
network settings will be displayed.
2. Rotate Tuning until the IP address is showing on the display. This is the local IP address
used by your radio on your network. In the example screen to the right the IP address is
192.168.1.27. Make a note of the IP address shown on your radio's display for the next
stage.
3. Ensure that your device with a web browser is on the same network as the radio. Enter
the IP address noted above into the address bar of your web browser. For example, enter
192.168.1.27 followed by Return. This will allow you to view some of the radios settings
and will allow you to change the friendly name. Type the new name in the box as shown
and then click 'Apply' to save the name. The new Friendly Name will now be visible to
network connected devices.
Friendly name
Your radio uses a Friendly Name so that it is identiable within remote control software such as the Oktiv app, on devices with Bluetooth, and in
connected apps such as Spotify. By default, your radio's Friendly Name will be shown as "Rambler Max". If you would like to change this name to
something more personalised you may either use the Oktiv app ('Settings' - 'Connected audio devices') or follow the instructions below.
View Settings
DHCP enable
SSID:
Julia S
IP address:
192.168.1.27
Subnet mask:
FM
DAB
60
To Next Page
Loading...
